Revel Performa3 M106 Bookshelf Speaker
Revel Performa3 M106 Bookshelf Speaker is true full-range loudspeakers that feature small footprints and sleek designs, allowing them to blend-in easily with your existing décor. They deliver an impressive combination of the wide frequency range, uncompressed dynamic range and low distortion across the entire audible spectrum.
Revel Performa3 M106 Bookshelf Speaker’s low-frequency transducers feature distortion reduction mechanisms that stabilize the flux field during operation, assuring low distortion even at high listening volumes. These precision transducers utilize ribbed aluminium cones for ideal piston-like behaviour that eliminates a major source of resonances that are clearly audible in most other loudspeakers.
Their cast aluminium frames eliminate another source of resonances that is common in many lesser-quality loudspeakers. These loudspeakers employ a sophisticated fluid-model designed low-frequency port with identical flares on both ends. This greatly minimizes dynamic compression and port-generated noise, assuring low-distortion low-frequency performance.
The Revel Performa3 M106 Bookshelf Speaker’s tweeter has been created around a newly designed motor and dome assembly that sets a new standard of transparency for speakers anywhere near the Performa3’s class. The tweeter’s integrated acoustic lens waveguide is based on a breakthrough mathematical approach that accurately matches the tweeter’s dispersion to that of the low-frequency transducer in the crossover region.
This gives the loudspeaker very smooth sound far off-axis – an important contributor to overall sound quality, providing consistent sound over an exceptionally wide listening area. In fact, this new waveguide actually increases the tweeter’s dispersion at higher frequencies.
The Revel Performa3 M106 Bookshelf Speaker is housed in enclosures that are similar to our flagship Ultima2 Series. These fully-curved enclosures are inherently stiffer than conventional box shapes and are formed with contiguous wood layers that prevent splitting. They feature strategically-oriented bracing that eliminates the possibility of enclosure-induced colouration. These beautiful, modern enclosures are finished in high-gloss piano black, high-gloss piano white or genuine American walnut in a process (developed and overseen by Italian luxury cabinet makers) that exceeds automotive finish quality.
The loudspeaker grilles are designed to minimize sonic diffraction or veiling and provide a clean, subtle appearance. The magnetic grille attachment method completely eliminates ugly hardware on the loudspeaker baffle, so if you decide to use the loudspeakers without grilles they will look like they were designed to be used without grilles
Highlights of the Revel Performa3 M106 Bookshelf Speaker
- Transducers feature motor-system distortion-reduction mechanisms that stabilize the flux field during operation
- Ribbed aluminium cones achieve piston like behaviour eliminating major sources of resonance
- New waveguides provide consistent sound over a wide listening area
- Enclosures created by Italian luxury cabinetmakers
- Fluid-model port designs keep distortion low
- Advanced crossovers optimize timbre accuracy both on-axis and throughout the room
General Specifications of the Revel Performa3 M106 Bookshelf Speaker
- Height 15″ (38.1 cm) Note
- Width 8.3″ (21 cm)
- Depth 11″ (27.8 cm)
- Weight 19 lb (8 kg) Note
- Crossover Frequencies 2.3 kHz
- Enclosure Type Bass-reflex via Rear-firing Port
- Finishes Piano Black or High Gloss Walnut
- High-frequency Driver Components 1” (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide
- Nominal Impedance 8 Ohms
- Input Connections Binding Posts
- Low Frequency Extension 10dB@39Hz -6dB@54Hz -3dB@59Hz
- Low-frequency Driver Components 6.5” (16.5 cm) Aluminum Cone, Cast-frame Woofer
- Recommended Amplifier Power 50-150
- Sensitivity 87 dB
Audio Specifications of the Revel Performa3 M106 Bookshelf Speaker
- Height 15″ (38.1 cm) Note
- Width 8.3″ (21 cm)
- Depth 11″ (27.8 cm)
- Weight 19 lb (8 kg) Note
- Crossover Frequencies 2.3 kHz
- Enclosure Type Bass-reflex via Rear-firing Port
- Finishes Piano Black or High Gloss Walnut
- High-frequency Driver Components 1” (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide
- Nominal Impedance 8 Ohms
- Input Connections Binding Posts
- Low Frequency Extension 10dB@39Hz -6dB@54Hz -3dB@59Hz
- Low-frequency Driver Components 6.5” (16.5 cm) Aluminum Cone, Cast-frame Woofer
- Recommended Amplifier Power 50-150
- Sensitivity 87 dB
Reviews
There are no reviews yet.