Dynavector DV XX2 MKII Moving Coil Cartridge

Dynavector DV XX2 MKII Moving Coil Cartridge

The Dynavector DV XX2 MKII Moving Coil Cartridge is a low output MC with Flux damper and Alnico magnet.

The DV XX-1 was the first cartridge to feature a “magnetic flux damper” (patent) and softened magnetism” (patent) processes that reject the magnetic fluctuation that is detrimental to a moving coil cartridges performance.

The The DV XX-2 MKII retains the benefit of the flux damper but features the Alinco-5 magnet and the similar rigid construction to the Te Kaitora Rua. Alnico magnets exhibit high magnetic flux density combining with a low coercive therefore magnetic resistance is lower than other magnetic types such as rare earth and ferrite, providing the exceptional stability of the XX-2 MKII output voltage. There is also the additional advantage of low magnetic and electrical resistance contributing to a discernable improvement in sound quality.

The XX-2MKII also exhibits deep powerful bass, treble is both clear and lively possessing none of the hardness found in many moving coil designs.

The XX-2MKII also features a 6 mm solid boron cantilever fitted with a Pathfinder Line contact stylus. PCOCC (pure copper ohno continuous casting process) copper wire is used for the coil. The output voltage of 0.28mV is higher than that of the XX-2 and 6 ohms impedance are suited to most moving coil phono stages.

For ridgity of construction the XX-2 MKII cartridge body is machined from 7075 aluminium the hardest available. However, having only a total weight of only 8.9 grams it is suitable for a variety of popular tonearms.

SPECIFICATIONS of the Dynavector DV XX2 MKII Moving Coil Cartridge

• Type: Low output moving coil cartridge with Alnico magnet and Flux damper
• Output Voltage: 0.28mV (at 1KHz, 5cm/sec.)
• Channel Separation: 30 dB (at 1KHz)
• Channel balance: 1.0 dB (at 1KHz)
• Frequency response: 20 – 20,000Hz (± 1dB)
• Compliance: 10 x 10-6 cm/dyn
• Tracking force: 1.8 – 2.2 grams
• Impedance: R=6 ohms
• Recommended load resistance: > 30 ohms
• Cantilever: 6mm length 0.3 mm dia. solid boron
• Stylus: 0.14 x 0.08 mm Line contact PF
• Weight: 8.9 grams